12 Squaring Heads Machine Line

Working sizes from 150×150 mm to 180×180 mm.

Full guarantee that the same quantity of material is removed on both sides of the piece by means of a centering device with roller pneumatic guides.

Full guarantee of the orthogonality of the pieces by means of an aligning driving device made up of a motor-driven trolley with two thrusting points.

Grinding wheels up to 350 mm diameter can be fit thanks to the enlarged pitch of the calibrating heads. As a consequence, there will be a big saving on the cost of tools, fewer tool replacements and therefore fewer machine stops. The operators can move easily while replacing tools and during servicing operations.

Power motors up to 11 kW can be installed on each spindle in case very thick materials should be worked.

The stress group with belts and pneumatic control, guarantees a perfect grip on the material, making it firmer and as a consequence, the working quality improves.

The 45° tool is very easy to replace thanks to the turning-over system of the support.

Very reduced water consumption thanks to the jet placed directly on the point of contact between the tool and the material.

All settings to change the size as well as the parameter variations are performed by means of a touch-screen PC. The operator can easily create recipes with an automatic call-up.

Excellent decimal adjustment, by means of a graduated nonius, of the calibrating heads. The wear condition of the tools is easy to check thanks to the independence of the protective casing.